Proper silicon impregnator application is necessary for a variety of reasons. In this article, Fred Hueston, Chief Technical Director of Surface Care Pros and owner of Stone Forensics provides tips for silicon impregnator application, including how to avoid or remove a sticky residue.
Remember to follow any safety recommendations on the product label, such as proper ventilation and protective gear. Make sure the surface is free of dust, grit, contaminants, and coatings.
*To provide the desired level of protection against discoloring agents and oils for a stone floor or surface, the appropriate amount of product must be applied. Check the manufacturer instructions for more details.
Let’s suppose that you follow the manufacturer instructions and Hueston’s tips, but you notice the floor feels sticky. Hueston says, “If there is a sticky film on the surface after you apply a silicon impregnator and you leave footprints as you go, you most likely applied too much sealer and did not properly remove the excess.
Sticky residue can be very problematic. It feels gross, attracts dirt and grime, and can create problems for care and maintenance. To remove it, Hueston suggests, “Wipe the floor with mineral spirits and dry buff the floor with a white pad or cloth.”
For more information, register to earn a Stone Restoration Master Course Certificate. You'll learn how to restore natural stone floors, countertops, and walls, engineered stone, and granite floors, using the most efficient and effective restoration procedures. Also included in this program is the Stain Care Pro course with a one-year subscription to the Stain Care Pro app and Understanding Sealers.
Article ID: 734
Created: March 11, 2023
Last Updated: March 11, 2023
Author: Fred Hueston
Online URL: https://sr-manual.com/kb/article/tips-for-silicon-impregnator-application-734.html