Stone & Tile Restoration

Removal of rust on terrazzo will typically require both a powder poultice and a commercially available rust remover. Iron-Out mixed with a plain poultice powder works well. You may also want to try using the Iron-Out alone, mixing it into a paste and... Read More

This depends on several factors, including how often the shower is used and what type of sealer was originally applied. After identifying the product, refer to the manufacturer’s recommendations. If water is no longer beading on the shower... Read More

This is a difficult problem, since water is usually required to refinish marble, and water will warp the wood. But there are several options. First, consider refinishing the marble using dry abrasives, such as sanding screens; these will create dust,... Read More

Marble and granite can certainly be mixed in various patterns on a floor. Different finishes, such as honed and polished, can also be mixed. While these combinations can be very attractive, their maintenance and eventual restoration must also be... Read More

V-edge is a term used by professional stone refinishes to describe the shiny edge that may remain after polishing. V-edges result from uneven tiles. When the tile is polished, the polishing pad can not reach the lower edge of the uneven tile, and... Read More

There are several processes for the polishing of marble, and recrystallization is one of them. Refer to question # 17 for a complete description of this process. The safety of the process is a safe as the applicator. Be sure the marble contractors is... Read More

Both granite and marble make excellent counter tops, depending on the counter’s intended use. Marble is sensitive to acids, which can make it difficult to keep polished in a kitchen. Granite, by contrast, is acid-resistant, and can make an... Read More

Curling in green marble can be a serious problem when the marble is set in a wet mud or thin-set. The Marble Institute of America recommends that green marble be set with an epoxy-based compound. Check with the installer and see what has been used to... Read More

The acid has etched your marble, which will now have to be polished or (possibly) honed. Depending on how deep the marble is etched it may require a heavy grinding. Perform a test in a small area to determine what grit diamond will be required. Make... Read More

There are several grout paints and dies on the market. But be aware that coloring grout can be a tedious task requiring great patience and a steady hand. It is also extremely important that the grout be thoroughly cleaned; otherwise the color will... Read More